SDR-JeD89-270/150-N IR Intelligent High Speed Dome Camera User Manual

 

 

 

 

 

 

IR Intelligent High Speed Dome Camera

 

 

 

User Manual

 

 

 

 

 

 

※ Read the manual carefully before use, please take care of it for instant consult. J

 

Content

 

chapter 1 foreword    3

chapter 2 product summarize    4

2.1 product profile    4

2.2 capability feature    4

2.3 function description    5

2. 4 English menu index    ……………………………………………………………………………………7

2.5 technical parameters    …………………………………………………………………………………….8

2.6 quick operation guide ………………………………………………………………………………….8

chapter 3 installation    9

3.1 dome camera DIP switch setting    9

3.1.1 enter to DIP switch setting    9

3.1.2 DIP switch setting    10

3.2
installation of IR&intelligent speed dome    12

3.2.1the sizes of dome and bracket    12

3.2.2 the installation of dome and bracket    13

chapter 4 basic operation of dome    13

chapter 5 menu setting    15

5.1 main menu    15

5.2 < CAMERA SETTINGS >zoom parameters setting    16

5.3 <DOME SETTINGS>dome setting    17

5.4 < FUNCTION SETTINGS >function setting    17

5.4.1<PRESET SETUP>(presets setting)    18

5.4.2<TOUR SETTINGS>(cruise setting)    18

5.4.3<SCAN SETTINGS>(scanning setting)    20

5.4.4<PATTERN SETTINGS>(patrol track setting)    21

5.5 SYSTEM SETTINGSsystem settingmenu    22

5.5.1 DISPLAY SETTINGS (show setting):    22

5.6 CLEARANCE SETTINGS (eliminate setting):    23

5.7 SPECIAL_FUNC MENU (special function menu):    23

5.7.1 IR SYSTEM SETUP (IR system setting):    24

chapter 6 Simple fault clearing form and maintain    25

6.1 Simple fault clearing form    25

6.2 notes    25

6.3 aftersales service    26

 

 

 

 

 

 

 

 

 

Chapter 1 foreword

At the start of the installation and use of infrared intelligent high-speed dome (hereinafter referred to as “dome”) before, please read the following information:

1. Before installation, please read carefully the product manuals and installation guide.

2. Do not put products in unstable plane test, such as the installation of operation, in before operation to ensure the machine put smoothly and assembly firmly.

3. Transportation and storage process to prevent stress, violent vibration and soaking etc of product damage.

4. This product will not reversed installation; for high-speed dome to handle with care, don’t push hard on the various structural components, or it may cause a mechanical problem, affects the high-speed dome overall performance. High-speed dome lens front transparent material belongs to advanced optical materials, avoid to use the hand directly touch, lest cause scratches, affects the image quality.

5. Do not send any solid object or fluid substance penetrated machine, lest damage machine.

6. Wiring must observe the electrical safety standard, use this machine to bring special power supply. This product rs-five 485 video signal and using TVS level prevent lightning technique can effectively prevent 500W below power by lightning, surge and other kinds of pulse signal of equipment damage. Video signal rs-five 485 and during transmission with high pressure equipment or cable should keep sufficient distance, when necessary even prepare necessary lightning, prevent surge protection.

7. Whether used or not in use, never can make camera aimed at the brightness of the sun or other objects. Or you could make CCD permanent damage.

8. Don’t use it beyond standard of environmental temperature, humidity.

9 in this product within and no user serviceable parts. When the machine is a fault, not easily to machine any repair operations, should first and specifications found fault, find no fault reason is ask professional maintenance. Relevant maintenance work, must by my company authorized maintenance inspection organizations

 

 

 

 

 

 

 

 

 

 

Chapter 2 product summarize

2.1 product introduction

Infrared intelligent high-speed ball is used in today’s latest of scientific and technological achievements, the sophistication of manufacturing process, Comprehensive years of experience of the successful development of automatic zoom lens, configuration of high-performance digital signal processing (DSP) camera, Set the built-in yuntai and digital decoder integrated, represents a new generation of high technology to monitor the product development trend. It adopts full digital control, mechanical exquisite design simple, can be arbitrary quickly positioning and continuous tracing scanning, with automatic tracking the camera, realizing function in the true sense of all-round, without the blind spot of the intelligent surveillance, Can automatically adapt to the environment of light and shade and target near-far changes, High reliability, long and stable operation, maintenance unnecessary.

Infrared intelligent high-speed ball combines various control protocol, can support a variety of popular system platform. With other system matching, each system connection and method of use not identical, here do not specify, please contact the relevant system manufacturer or dealer contact to get necessary information.

Infrared intelligent high-speed ball of various characteristics of large area, applicable to all walks of life activities target surveillance. Such as power systems, telecom departments, bank security, mines, intelligent building, intelligent community, city road monitoring, airports, railway stations, etc as security monitoring situation, and the fire monitoring system of image monitoring equipment.

 

2.2 performance characteristics

1. Built-in OSD English onscreen menu, via the menu to display and change the ball machine information and parameters can be set and call preset point, figure scanning, regional scanning and display area, etc.

2. Integrated design, compact structure, and high reliability.

3. 256 preset points.

4. Adopt RS485 bus control.

5. Precision of motor drive, smooth operation, sensitive reaction.

6. Level 360 ° continuous rotation, no monitoring blind spots.

7. Rotation speed camera variable times according to automatically adjust multiples,

8. 90 °, automatic vertical flipping 180 ° after continuous monitoring.

9. Automatic focus, automatic white balance.

10. Backlighting compensation function, have strong illuminant environment can see all the objects.

11. Combines various control protocol, baud rate is adjustable.

12. Wide dynamic camera support (SONY1010, SONY990) SONY490,

 

2.3 functional specification

Below briefly introduce infrared intelligent high-speed ball’s main function, and describes the various functions and operating the general principles, don’t involve concrete operating methods.

1 set address coding, baud rate, control protocol

Any operation command has its target camera address coding, baud rate, control protocol, single camera just response to their own address coding, baud rate, control protocol consistent operation orders. Camera address coding, baud rate, control protocol specific setting methods please refer to dial the code Settings.

2 the target tracking.

The user can use the control on keyboard rocker control the camera up, down, left and right rotation, could be used to track a moving target or mobile horizon, another can adjust focal length to change perspective size or target image size. In automatic focus condition, with the rotation of the lens, cameras automatically on the scenery changing quickly adjust, instant get a clear picture.

3. Focal length/speed automatic matching technology

Manual adjustment, focus the long ball machine, high-speed reflect make slight touches rocker may makes the picture is moving, thereby causing loss of data. Based on the humanized design, intelligent ball focal distance according to automatically adjust camera horizontal and vertical speed, make manual operation is more easy target tracking.

Automatic flip 4.

The operator will lens pull bottom (vertical) if you still hold rocker, right now lens level automatically rotate for 180 ° immediately after 90 °, upturned blade can be directly to watch on the back of the scenery, so as to realize the longitudinal 180 ° throughout the continuous monitoring.

5. Setting and call preset position

Presets feature is the ball under the current state of functions of the horizontal Angle, yuntai Angle and camera position such as parameters storage focal length into memory, when need can rapidly and will call these parameters to adjust the yuntai and camera position. The operator can be quickly through controlling the keyboard, infrared controller etc control equipment storage and calling the preset point, ball machine support 256 preset points.

Lens control 6.

(1) The focal length of control

Users can through ball machine control keyboard or matrix host zooming unhealthily, to obtain the required a panoramic view of the screen, or are subtle view.

(2) Focus control

The system default auto-focusing, zoom, a camera in the center of autofocus scenery pictures, keep clear image; under special circumstances, the user can manual focus to hope image effects.

When exposed to manual focus condition, to restore auto-focusing, just shake analog stick can recover automatic focus. Another can also send special control command or call an arbitrary preset bits of recovery auto-focusing method.

A camera under the following circumstances will not be able to camera target auto-focusing:

A. goal is not a picture center;

B. targets at the far and near the place,

C. target for light objects, such as luminous objects such as NaiDeng, spot,

D. goal in with water or dust behind glass,

E. target move too quickly,

F. area of the target, such as wall,

G. goal too dark or was vague.

Aperture control. 7.

Users can through controlling the keyboard, manually adjust aperture size, to obtain the required picture brightness.

8. Automatic backlighting compensation

When backlit compensation function opened, the camera can be automatically when light under the background of darker targets brightness compensation. To light the background of day lighting adjustment, and avoid background illumination and cause the whole picture posse shining, but through dark and target, thus obtains not discern clear images.

9. Auto white balance

According to the environment radial change, automatic adjustment, reproduce true colors.

10. Night vision function (color black and white conversion)

With night vision function of camera, in automatic color black and white conversion mode, can according to the environment of the light changes automatically converts CCD intensity of illumination. Such as: during the day because of the light is enough, use general illumination guarantee colorful picture. But at night can automatically change for a low illumination, with black and white pictures showed clear scenery.

11. Automatic cruise

Through a preset cruise preset point, which will be certain preset click request order to automatic arrangement cruise queue, only one external commands can let indoor medium-speed ball automatically set according to the preset point order defined intervals reciprocating kept movement.

12. Figure scan

Figure scan is through the menu will ball chance done by track storage down on electricity action, free action, alarm linkage, etc to invoke the store scan route.

13. Scanned continuously

Only an external command or through action, free action on electricity, alarm linkage, etc to call, can make the ball with a certain speed machine horizontal continuous cycle scan.

14. Intermittent scan

Only an external command or through action, free action on electricity, alarm linkage, etc to call, can make the ball with a certain speed machine horizontal batch of circulation scan.

15. Regional scan

Only an external command or through action, free action on electricity, alarm linkage, etc to call, can make the ball with certain horizontal machine speed, set range between scan.

16. Wide dynamic

Support SONY newest FCB – EX490, EX990 FCB – FB – EX1010 wide, dynamic camera, applicable in strong backlight environment of applicable.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.4MENU INDEX





 


 

 


 


 


 

 


 

 







 


 


 



 


 

 

 


 

 



 

 

 

25 technical parameters

 

Model  

IR high speed dome 

Image sensor  

1/3 ″ 1/4 ″CCD

Signal mode 

PAL/NTSC 

resolution 

color420TVL 

Color 480TVL 

Color 540TVL

Color 650TVL 

Min illumination 

Color to B/W,color0.05Lux,B/W 0.001Lux 

S/N ratio 

≥60dB 

Backlight

compensation 

on/off 

White balance 

Auto 

Electronic shutter 

1/501/10000 /s

Focus length 

3.985.8mm

3.286.4mm

3.399mm

3.2115.2mm

Optical focus 

22× 

27X 

30X 

36X 

Focus 

manual/Auto, take high-performance DSP to realize complete

digital and ultra-high speed focus function 

presets 

255 

Pattern track 

4groups,each can record 200 actions 

Tour track 

4 tours, 16 presets join tour, the presets’ residence time can be set

Other scan 

4 scans, supports >180°and 180°< modes.

Rotation Range 

Horizontal 360°unlimited rotation, vertical 180°,auto invert 

Rotation speed 

Horizontal & vertical Min:0.01°/s,Max 300°/s 

IR effect

Distinguish face from 80m, Distinguish body shape from 100m

Distinguish face from 100m, Distinguish body shape from 120m

Communications  

PELCO D and PELCO P 

Menu function

English / Chinese Full screen menu 

Temperature Control 

Optional 

Power supply

DC12V/4A

AC24V/3AOptional

Cover dimension

6inch

Work Environment 

-10℃+70℃select temperature control accessories ,

95%RH

Material 

Metal casting aluminum shell, waterproof IP66 

 

2.6 Camera function quick operation guide

 

Preset Settings


        

    


Scan setting

 


        

 

        

 

Note The other three scan can be set in the menu.

 

Tour setting

Take tour 1 for example


        

The other three tour, please see to <5.4.2 tour setting>.

 

Pattern setting


    

 




 

 

 

Chapter 3 installation

3.1 Speed dome DIP switch settings

High speed dome camera is compatible with a variety of control protocols, baud rate can be adjusted to make it compatible with more monitoring and control system. Before install the speed dome camera, please adjust the DIP switch to appropriate code according to your requirements, in order to adjust the baud rate, control protocol, address code. If there are no special requirements, the speed dome factory default address code is 1, baud rate is 2400BPS corresponding code, and control protocol is PELCO-D corresponding code.

3.1.1 Enter DIP switch settings

Change BAUD-RATE, PROTOCOL and ADDRESS through DIP switch. Module, housing and DIP switch pictures see picture 1,


Picture 3-1

 

SW1 switchBaud rate and control protocol switch

SW2 switchAddress DIP switch

Dial the code switch to “ON” means “1”, dial the code switch to “OFF” means “0”, dial the code switch ON the left and right for low to high

Baud rate and control protocol Settings list:

SW1 

Number

1 

2 

3 

4 

 

Control protocol

OFF 

OFF 

   

PELCO-P/D self-adaption

ON 

OFF 

   

PELCO-P/D self-adaption

OFF 

ON 

   

Save

ON 

ON 

   

Save

Baud rateBPS

   

OFF 

OFF 

2400 

   

ON 

OFF 

4800 

   

OFF 

ON 

9600 

   

ON 

ON 

19200 

 

2. SW2 Switch sets the ball machine address coding. Address set by binary mode, total can set 256 different address coding, see ball machine address coding sheets. Factory default Settings as shown in figure 2.

 

Dome address

SW2dome address encode table

1 

2 

3 

4 

5 

6 

7 

8 

0 

OFF 

OFF 

OFF 

OFF

OFF 

OFF 

OFF 

OFF 

1 

ON 

OFF 

OFF 

OFF 

OFF 

OFF 

OFF 

OFF 

2 

OFF 

ON 

OFF 

OFF 

OFF 

OFF 

OFF 

OFF 

3 

ON 

ON 

OFF 

OFF 

OFF 

OFF 

OFF 

OFF 

4 

OFF 

OFF 

ON 

OFF 

OFF 

OFF 

OFF 

OFF 

5 

ON 

OFF 

ON 

OFF 

OFF 

OFF 

OFF 

OFF 

6 

OFF 

ON 

ON 

OFF 

OFF 

OFF 

OFF 

OFF 

7 

ON 

ON 

ON 

OFF 

OFF 

OFF 

OFF 

OFF 

8 

OFF

OFF 

OFF 

ON 

OFF 

OFF 

OFF 

OFF 

9 

ON 

OFF 

OFF 

ON 

OFF 

OFF 

OFF 

OFF 

10 

OFF 

ON 

OFF 

ON 

OFF 

OFF 

OFF 

OFF 

11 

ON 

ON 

OFF 

ON 

OFF 

OFF 

OFF 

OFF 

12 

OFF 

OFF 

ON 

ON 

OFF 

OFF 

OFF 

OFF 

13 

ON 

OFF 

ON 

ON 

OFF 

OFF 

OFF 

OFF 

14 

OFF 

ON 

ON 

ON 

OFF 

OFF 

OFF 

OFF 

15 

ON 

ON 

ON 

ON 

OFF 

OFF 

OFF

OFF 

16 

OFF 

OFF 

OFF 

OFF 

ON 

OFF 

OFF 

OFF 

17 

ON 

OFF 

OFF 

OFF 

ON 

OFF 

OFF 

OFF 

18 

OFF 

ON 

OFF 

OFF 

ON 

OFF 

OFF 

OFF 

19 

ON 

ON 

OFF 

OFF 

ON 

OFF 

OFF 

OFF 

20 

OFF 

OFF 

ON 

OFF 

ON 

OFF 

OFF 

OFF 

21 

ON 

OFF 

ON 

OFF 

ON 

OFF 

OFF 

OFF 

22 

OFF 

ON 

ON 

OFF 

ON 

OFF 

OFF 

OFF 

23 

ON 

ON 

ON 

OFF

ON 

OFF 

OFF 

OFF 

24 

OFF 

OFF 

OFF 

ON 

ON 

OFF 

OFF 

OFF 

25 

ON 

OFF 

OFF 

ON 

ON 

OFF 

OFF 

OFF 

26 

OFF 

ON 

OFF 

ON 

ON 

OFF 

OFF 

OFF 

27 

ON 

ON 

OFF 

ON 

ON 

OFF 

OFF 

OFF 

28 

OFF 

OFF 

ON 

ON 

ON 

OFF 

OFF 

OFF 

                 

246 

OFF 

ON 

ON 

OFF 

ON 

ON 

ON 

ON 

247 

ON 

ON 

ON 

OFF 

ON 

ON 

ON 

ON 

248

OFF 

OFF 

OFF 

ON 

ON 

ON 

ON 

ON 

249 

ON 

OFF 

OFF 

ON 

ON 

ON 

ON 

ON 

250 

OFF 

ON 

OFF 

ON 

ON 

ON 

ON 

ON 

251 

ON 

ON 

OFF 

ON 

ON 

ON 

ON 

ON 

252 

OFF 

OFF 

ON 

ON 

ON 

ON 

ON 

ON 

253 

ON 

OFF 

ON 

ON 

ON 

ON 

ON 

ON 

254 

OFF 

ON 

ON 

ON 

ON 

ON 

ON 

ON 

255 

ON 

ON 

ON 

ON 

ON 

ON 

ON 

ON 

 

3.2 installation of IR & intelligent speed dome

3.2.1the sizes of dome and bracket

Product diagram 3-1

 


 

Picture 3-2

The dimension of bracket 3-2


 

Picture 3-3

 

 

 

3.2.2 The installation of dome and bracket

Step 1the installation of bracket




 

Picture 3-4
Determine the screw holes position picture 3-5 drilling
in the position

 



 

Picture 3-6 drilled the holes picture3-7
Tighten the screw

 

In stay on the wall of ball machine installation, according to determine the installation position stent screw holes position with signal pen on wall draw hole position as shown in FIG. 3-3. On wall drilling as shown in figure 3-4. The expansion bolts into the hole, Will cable through stents, then on the support screw holes on the nuts tighten the screw, as shown in figure 3-6.

Step 2: the ball machine installation

Stents three screw loose on the cover, the ball will be machine head alignment teams, tighten the scaffolds overhead into three fixed screw, in case the ball machine off.

 

Chapter 4 basic operation of dome

Due to the different system platform specific operation method, generally should not identical with system manufacturer operation manual shall prevail, different circumstances will have special requirements and operation method, please contact with dealers get necessary information. Here only introduced connection this company produces the control keyboard, of ball machine control method.

1. Self-checking electrify.

Ball machine after electrify, camera first horizontal and vertical direction automatically after the sports, in lens to pull recently, and down after the farthest stop. Through self-check determine ball machine running normally.

Control the camera up, down, left and right rotation:

When choosing a camera, can pass the keyboard rocker manual control ball machine up, down, left and right movement. The camera shake control lever of action, when rocker to right when they are shaken, the camera also to the right in the northern hemisphere. Likewise, when joystick left when I shake the camera also left movement. Rocker vertical direction when they are shaken, camera also follow the corresponding action do vertical direction. According to the diagonal direction when shaken rocker, can let a camera while doing the horizontal and vertical direction of movement and movement direction and rocker consistent.

2Presets setting

According to the following steps to set preset:

(1) Select the camera (more information please read control of the keyboard manual);

(2) Operation joystick, zoom button, focus button, IRIS buttons adjust the camera picture images;

(3) Press the number key +PRESET (Enter the specified preset), save the preset scene parameters.

3Call preset

Follow the below step to watch the preset:

1select the camera

(2) Press the number key +PREVIEW (enter the designated preset), the camera move to the preset position immediately, the lens zoom, focus and aperture is also automatically change to the preset parameters; if the input is a special function of the preset (see “Preset function menu”), the speed dome camera will perform with special features preset of the corresponding functions (such as: Enter the 97/99

Preset, the camera auto-tracking feature).

Preset function list

Call commands

Execute function

CALL 64/95 PRESETS

Enter dome camera menu

CALL 57 PRESETS

Enter CAMERA menu

CALL 56 PRESETS/IRIS-

Force exit menu

CALL 97/99 PRESETS

Start automatic scan

CALL 96 PRESET OR OTHER PTZ CONTRONL

Close automatic scan

CALL 32 PRESETS

Start Tour function 1

CALL 53 PRESETS

Start Tour function 2

CALL 49 PRESETS

Start Tour function 3

CALL 50 PRESETS

Start Tour function 4

CALL 58 PRESETS

Pattern scan 1

SET 51 PRESETS

Set left/ right scan 1 -start

SET 52 PRESETS

Set left/ right scan 1 -end

CALL 51 PRESETS

Call left/ right scan 1

CALL 52 PRESETS

Call left/ right scan 2

CALL 93 PRESETS

System restart

CALL 94 PRESETS

Recover the factory parameters

CALL 59 PRESETS

Started four combinations Tour function Tour preset expand to 64 pcs)

CALL 103 PRESETS

Infrared lamp automatic outdoor mode (1x-7x, all Infrared lamp open. after 7x, only external circle Infrared lamp open. Internal infrared lamp close)

call 104 presets

Infrared lamp automatic indoor mode(1x-7x,only internal Infrared lamp open. after 7x,only external circle Infrared lamp open)

 

4. Close-up lens and wide-angle lens

Adjust the camera lens variable times pull away or close, to enlarge or reduce scenery to feature and wide-angle effect. Press ZOOM+, camera scene will be near, and the object on the camera image will be 14 zoom in. press ZOOM- ,camera scene will be far, and the object on the camera image will be zoom out. If you quickly press and loose variable times buttons, the camera images which is on the monitor will be a little changed. The camera variable times changed is depend on pressing the length of time of buttons.

 

5Lens focus control

Focus is a process that adjusting one of camera image and scan’s resolution. Press FOCUS+, the long distance of object or scene will be clearer, short distance of object and scene will be fuzzy, press FOCUS- , short distance of object and scene will be clear, long distance of object will be fuzzy. Repeated adjustment focus on key until the object which one on the monitor is from fuzzy to clear. The same with the variable times, the camera’s focus changed is depend on focus pressed length of time.

 

6. Manual iris function

IRIS changed the brightness level of camera images, press IRIS+, camera image

Brighten, press, camera image will darken. It’s same with the buttons of variable times, camera’s bright and dark are depend on length of time you pressing the IRIS buttons. Chapter 4 menu setting this chapter will be detailed introduction of OSD menu. Switch on the power, the dome camera, after self monitor screen will show the following information:

 

Chapter 5 menu setting

This chapter will detail OSD menu operation. Switch on the power, ball machine, after the monitor screen self-checking admiral are shown in the following information:

VERSION:V10.04

PROTOCOL:PELCO-P/D

BAUD RATE:2400

CAMERA ID:1

 

HORIZONTAL CHECK OK

VERTICAL CHECK OK

CAMERA CHECK OK

 

These messages will always show the dome camera till self-checking finished.

Due to the different monitoring system for the dome camera is not identical operation method, the specific operation please contact with dealers. The following simple introduction to use keyboard control operation of OSD menu.

1. Enter main menu: CALL No.64/ 95 preset, and you will enter OSD main menu. Shake left /right FOCUS+ /FOCUS-Is the enter key. IRIS-iris closeis the exit key

2Enter other menu Up / down shake the joystick, so that the cursor is pointing to a menupress FOCUS+ enter the menu.

3Function select Up / down shake the joystick or press ZOOM+ / ZOOM-, so that the cursor is pointing to a menupress FOCUS + select this function.

4Parameter select up / down shake the joystick or press FOCUS+/ FOCUS- to select the parameter

5Restore settings Press IRIS+, restore the settings it is effective if has corresponding prompt.

6Does not restore and back to last menu: press IRIS- back to last menu, it is effective if has 15 corresponding prompt.

7Exit menu: Up / down shake the joystickso that the cursor is pointing to exit option, press IRIS + exit OSD menu.

8Back to previous menu Up / down shake the joystick, so that the cursor is pointing to back optionpress FOCUS + and back to previous menu.

NotesDifferent speed dome setting, different display on speed dome.

The following is detailed description of use smart standard control keyboard to operate OSD menu.

 

5.1 Main menu

Speed dome work normally, set No.64/95 preset, enter main menu, screen display is as picture 3.1.



Picture 5.1 MAIN MENU

Main menu contents description

< CAMERA SETUP >

< DOME SETTINGS >

< FUNCTION SETTINGS >

< SYSTEM SETTINGS >

< SPECIAL FUNCTION >

<EXIT>

To enter the menu and execute of the various functions of the basic operation is as follows

1On the picture 3.1<MAIN MENU>Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursor is pointing to a menu item or function option

2Press FOCUS+enter menu or operate a function option.

 

5.2 < CAMERA SETUP >zoom parameters setting

On the picture 3.1<MAIN MENU>Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursor is pointing to <CAMERA SETUP>press FOCUS+enter camera parameters setting as picture 3.2<CAMERA SETUP> MAIN MENU


 

CAMERA SETUP is used to set camera basic information, functions are as below

The first level menu,

ZMTTIME zoom times display, OFF/ON

AF MOOE: Focus settings, AUTO/MANU/KEYAUTO

IRCUT MOOE: IR switch, AUTO/ON/OFF

AGCMAX: Auto gain, 096.

LENS INIT: Lens initialization, —

DEFAULT: Default—

NEXT: Enter next level menu

EXIT:

The second level menu

LEN: AUTO/MANUAL

SHUTTER/AGC: Shutter, auto gain

WHITE BAL: White balance, AUTO/PUSH/USER1/USER2/ANTI CR/MANUAL/PUSH LOSK

BACKLIGHT: Backlight compensation, OFF/HLC/BLC

PICT ADJUST Picture adjustment

ATR: OFF/ON

MOTION DET: ON/OFF

NEXT Enter next level menu

EXIT: SAVE ALL:

The third level menu

PRIVACY: OFF/ON

DAY/NIGHT: AUTO/BW/COLOR

NR Noise reduction

SYNC: TNT—inter sync

LANGUAGE:

CAMERA RESET

BACK:

EXIT: SAVE ALL:

Notice: There are some differences among different models cameras, contact manufacturer when necessary.

 

5.3 <DOME SETTINGS>

On the picture 3.1 <MAIN MENU>Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursor is pointing to <DOME SETTINGS>press FOCUS+enter dome camera setting as below picture3.3 DOME SETTINGS


Picture 5.3 DOME SETTINGS

On the picture 3.3 DOME SETTINGS, function as below;

DOME SETTINGS

AUTO INVERT ON/OFF

IDLE TIME/MIN : 0~255, closed: 0

IDLE ACTIVE NO/PRESET/SCAN/PATTERN/TOUR

ACTIVE No.

REBOOT RUN NO/PRESET/SCAN/PATTERN/TOUR/LAST STA

RUN No.

RETURN

 

5.4 < FUNCTION SETTINGS >

On the picture <3.1MAIN MENU>Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursors pointing to<FUNCTION SETTINGS>press FOCUS+enter function setting menu as below 3.4< FUNCTION SETTINGS>


Picture 5.4< FUNCTION SETTINGS >

<FUNCTION SETTINGS> menu is used to set functions, functions as below;

<PRESET SETUP>

<TOUR SETUP>

<SCAN SETUP>

<PATTERN SETUP>

RETURN

FUNCTION SETTINGS

PRESET SETUP —>

TOUR SETUP—>

SCAN SETUP—>

PATTERN SETUP—>

RETURN

 

5.4.1<PRESET SETUP>

Presets setting, the specific operation is as follows: On the picture <3.4< FUNCTION SETTINGS >Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursor is pointing to<PRESET SETUP>press FOCUS+enter as below


Picture 5.4.1 <PRESET SETTINGS >

< PRESET SETTINGS >menu is used to set presets, Functions description as below;

PRESET No.the number of presets

PRESET SETpresets setting

PRESET CALLcalling resets

PRESET DELETErelating resets

RETURN: return

 

5.4.2<TOUR SETTINGS> (cruise setting)

4.4.2<TOUR SETTINGS>

On the picture<5.4 FUNCTION SETTINGS>Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursor is pointing to<TOUR SETTINGS>press FOCUS+enter tour settings menu as below;


Picture 5.4.2< TOUR SETTINGS >

< TOUR SETTINGS >menu is used to set tour, function as below;

TOUR No.

STAY DELAY(S):0~255

TOUR SPEED0~63 level

TOUR SET

TOUR RUN

TOUR DEL

RETURN:

TOUR setting is used to set lens auto execute preset track for scanning. The step as below;

1On the picture <3.4.2< TOUR SETTINGS > Up / down shake the joystick or press ZOOM+/ZOOM-so

That the cursor is pointing to <STAY DELAY S0255S] press FOCUS+/FOCUS-left/right to shake the

Joystick, choose the delay time

2then Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursor is pointing to <TOUR

SETpress FOCUS, you can see No. 1~16 presetsleft/right to shake the joystick, choose NO.1 PRESETS

Press IRIS + savereturn the menu setting No. 2~16 presets same with before as below picture

Preset position can be changed by pressing ZOOM+/ZOOM- press IRIS + saved.

3then Up / down shake the joystick or press ZOOM+/ZOOM-so that the cursor is pointing to < TOUR RUN>

 

5.4.3<SCAN SETTINGS>

On the picture <3.4 FUNCTION SETTINGS>Up / down shake the joystick or press ZOOM+/ZOOM-so that

The cursor is pointing to <SCAN SETTINGS>press FOCUS+enter scan setting menu as below;


Picture 5.4.3 SCAN SETTINGS

< SCAN SETTINGS > menu is used to set left/right scan. Functions as below;

SCAN No.

SCAN MODE
(>180°or 180°)

SCAN SPEED:0~63 level

START POSTION

END POSTION

SCAN RUN

SCAN DELETE

RETURN

<left/right scan setting> is used to set left/right scan route, operated as below;

1Choose left/right scanning number

2On the picture 3.4.3 <left/right scan menu>up/down to shake the joystick and press

ZOOM+/ZOOM-make the cursor point to<START POSTION>

3Press FOCUS+enter scan start, shake the joystick to determine left/right scanning end position

Press IRIS+save;

4. Up/down to shake the joystick ZOOM+/ZOOM-make the cursor point to <END POSTION>

5. Press FOCUS+enter scanning end, shake the joystick to determine left/right scanning end position

Press IRIS+save;

6. Up/down to shake the joystick, choose<SCAN RUN>, and start left/right scanning.

 

5.4.4<PATTERN SETTINGS>

On the picture 3.1 <FUNCTION SETTINGS>up/down to shake the joystick, make the cursor point at <PATTERN SETTINGS >press FOCUS+enter pattern settings menu as below;


Picture 5.5<PATTERN SETTINGS>

<PATTERN SETTINGS> menu is used to record user defined scan route, function description as below;

PATTERN No.

RECORD NEW PATTERN

PATTERN RUN

PATTERN DELETE

RETURN

PATTERN SETTINGS

PATTERN No.

RECORD NEW PATTERN

PATTERN RUN

PATTERN DELETE

RETURN

Pattern scanning is used to set and clear the pattern scanning route.

Pattern Scanning Numbersselect the scanning number from 1 to 4. As follow

1On the picture 3.5<PATTERN SETTINGS >up/down to shake the joystick make the cursor point at

<PATTERN NO.>

2up/down to shake the joystick, press ZOOM+/ZOOM-make the cursor point at < RECORD NEW PATTERN

>FOCUS+enter record pattern scanning

3up/down to shake the joystick or press ZOOM+/ZOOM-record pattern scanning route;

4up/down to shake the joystick or press ZOOM+/ZOOM-up/down to shake the joystick or press <

PATTERN RUN >press FOCUS+run pattern scanning.

 

5.5 SYSTEM SETTINGS

On the picture 3.1<MAIN MENU>up/down to shake the joystick or press ZOOM+/ZOOM-make the cursor point at <SYSTEM SETTINGS>press FOCUS+enter 3.6 <SYSTEM SETTINGS> as below.


Picture 5.5 SYSTEM SETTINGS

< SYSTEM SETTINGS > menu is used to set the system. Functions description as below;

SYSTEM INFORMATION

<DISPLAY SETUP>

<CLEARANCE FUNCTION>

FACTORY DEFAULT

SYSTEM REBOOT

RETURN

 

5.5.1 DISPLAY SETTINGS

On the picture 3.6 <SYSTEM SETTINGS>up/down to shake the joystick, make the cursor point at < DISPLAY SETUP>press FOCUS+enter 3.6.1 <DISPLAY SETTINGS>menu, as below;


Picture 5.5.1 DISPLAY SETTINGS

<DISPLAY SETTINGS> menu is used to set display setting, function description as below;

DOME TITLEON/OFF

DOME ID TITLEON/OFF

DYNAMIC TITLEON/OFF

PTZ TITLEON/OFF

RETURN

 

5.6 CLEARANCE SETTINGS:

On the picture 3.6 SYSTEM SETTINGSup/down to shake the joystick, make the point at < CLEARANCE FUNCTION>press FOCUS+enter< CLEARANCE SETTINGS> setting, as below;


Picture 5.5.2 CLEARANCE SETTINGS

<CLEARANCE SETTINGS> menu is used to set clear function, description as below;

CLEAR PRESET

CLEAR SCAN

CLEAR TOUR

CLEAR PATTERN

RETURN:

 

5.7 SPECIAL_FUNC MENU:

On the picture 3.1MAIN MENUup/down shake the joystick, make the cursor point at < SPECIAL FUNCTION>press FOCUS+enter <SPECIAL_FUNC MENU> as below;



Picture 5.7 SPECIAL_FUNC MENU

<SPECIAL_FUNC MENU> menu is used to set other special function. Functions description as below;

IR SYSTEM SETUP
Suspense is no such menu settings

MOTION DETEC
ON/OFF

WDR LEVEL
OF/OFF

RETURN

 

5.7.1 IR SYSTEM SETUP:

On the picture 3.7 <IR SYSTEM SETUP> MENUup/down shake the joystick, make the cursor point at < IR SYSTEN SETUP>press FOCUS+enter3.7.1 SPECIAL_FUNC MENU as below;


 

 

 

 

 

 

 

Picture 5.7.1 IR SYSTEN SETUP

 

< IR SYTEM SETUP > menu is used to set IR system setup. Functions description as below;

IR MODE ON/OFF/AUTO

IR ON SENS1050 acquiesce in 25

IR OFF SENS60255 acquiesce in 80

RETURN

CURRENT LEVEL:

< IR SYTEM SETUP > menu is used to set IR system setup. Concrete operations as follows:

1In <IR SYSTEM SETUP> MENU, up/down shake the joystick, make the cursor point at < IR SYSTEN SETUP>press FOCUS+ or left/right joystick to choose the needed model, then press FOCUS+;

2Up / down shake the joystick, make the cursor point at < IR ON SENS>, press FOCUS+ or left/right joystick to choose the parameter.(<IR ON SENS>is adjust according to ISO of installation environment, normal environment based on system default value)

3Up / down shake the joystick, make the cursor point at < IR off SENS>, press FOCUS+ or left/right joystick to choose the parameter. (<IR ON SENS>is adjust according to ISO of installation environment, normal environment based on system default value)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chapter 6 Simple fault clearing form and maintain

6.1 Simple fault clearing and maintain

fault phenomenon

Possible causes

solutions

Electricity without action, no image

connect the wrong power cable

correct

Power supply is damaged

Replacement

Protective tube is damaged

Replacement

Power cable connect not

good

Eliminate

Self test and with image after power

on but can

not control

the IR high speed dome

camera address code,

baud rate is wrong

re-set the high speed dome camera address code, baud

rate

RS-485 cable connect

wrong

Check RS-485 connect cable

The image is

unstable

A poor contact for video

cables

Eliminate

Power is not enough

Replacement

Can control but not smooth

RS-485 cable bad contact

Check RS-485 control connections

One RS-485 cable break

Check RS-485 control connections

 

6.2 precautions

1. be careful transport

Transport, storage and installation process to prevent stress, violent vibration and soak for product damage.

2. Don’t unauthorized video camera

Don’t dismantle the screws or protective cover, inside machine and no user serviceable parts. The related work, shall be conducted by qualified service personnel.

3. Install carefully acrylic

Be careful, handled with care, don’t force extrusion machine and various structural components, lest cause ball machine breakdown. To be on the safe side, not installed ball cover do not electrify.

4. Power supply, video line and control

Video line and control the power cord, had better use the shielding wire and independent wiring, cannot be combined with other line Jiao Hun together.

Electrical safety 5.

Use must abide by various electrical safety standard, the ball machine or signal transmission lines should be with high pressure equipment or cable keep enough distance (at least 50 meters), when necessary even prepare necessary by lightning, surge protection.

Cleaning and 6.

Cleaning the camera casings, please use dry soft cloth to wipe, if bilge serious when, please use neutral detergent wiped gently. Don’t use strong or with non-abrasive cleaner, lest scratches on the outer garment, affects the image quality.

7. Note strictly sealed to prevent liquid from entering the or the eye winker fall into the ball inside machine equipment, otherwise, it will cause permanent damage.

8. Don’t beyond limit temperature, humidity is used below the condition that the camera.

Ball machine using temperature for – 25 ℃ to 70 ℃, humidity less than 90%.

9. Don’t the camera mounted in air-conditioning outlet nearby.

Under the following circumstances, lens for condensation of water vapor born mist.

By air conditioner when opened, rapid temperature closed causedl changes.

Off when the rapid temperature changeslwhen the door is opened by caused.

In can make glasses and fog under the environment of use.l

In smoky or dirt room inside and use.l

10. Don’t long cameras toward strong illuminant, such as the sun.

Spot light can cause screen aging etc. Long time will cameras toward strong illuminant, may be due to the color on filter CCD image caused damage lose color.

 

6.3 After service

Dear users, in order to ensure the full enjoyment of your services, please read the following products and services charter.

(1) Portray company supply the speed dome camera of limited warranty and lifetime maintenance services

1. The warranty period from the date of sale for 12 months, in the warranty period, you will enjoy the product free service, delivered or sent by the user (improper use, man-made causes of failure or an irresistible fault do not belong to the scope of the warranty).

2. After 12 month limited free repairing duration, the products will absorb life time repair with payable services

(2) Speed dome camera repair time.

1. Since the customer send the product to the Portray, 24-hour service.

2. Please advise the related contact first, then return the product to our company. Otherwise, the product not timely maintenance

Product Warranty Cards

Under this product warranty description to repair the goods. Note that every case of normal use the product itself due to quality problems caused by failures in the warranty period will be given free maintenance.

Warranty Description:

1. This product is free of charge warranty period of one year, during the warranty period any product quality problems occur, so doing the warranty card for free (non-human damage), life-long maintenance.

2. Resulted of improper use or other reasons as well as the failure of products outside the warranty period can be so doing card repair, free of maintenance, only charge the component costs.

3. Product required maintenance should be a copy of this card and the invoice with the product delivery of the Company or the local special maintenance department.

4. Open the machine by personal, tearing up letters labeling, we need to charge the components.

5. Do not repair the machine after the modification or installation of other functions to the product.

The following conditions will not be free:

1. Due to normal wear and tear caused by periodic inspection, maintenance, repair or replacement parts.

2. as the fall, extrusion, soaking, damp, and other man-made damage.

3. Because of flood, fire, lightning and other natural disasters or force majeure of the factors that damage.

4. By non-authorized repair centers repair the machine off.

5. Listed above, if changed please follow the related information.

 

Model No.

 

Manufacturing No.

 

Delivery date

 

 

Company name

 

Contact person

 

Company address

 

Company tell No.

 

 

Maintenance date

Fault condition

Manteca sites

Maintenance result

       
       
       
       

remarks__________________________________________________________________________________

 

 

Certification of product

 

 

 


 

 

 



 

 

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s