NanoStation

 

 

 

 

Overview

Leading Edge Industrial Design

02

The original NanoStation set the bar for the world’s first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation M and NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors along with integrated AirMax ( MIMO TDMA Protocol) Technology.

The low cost, hi-performance, and small form factor of NanoStation M and NanoStation Loco M make them extremely versatile and ideal in several different applications (see diagrams on right for some usage examples).

Integrated AirMax Technology

Unlike standard WiFi protocol, Ubiquiti’s

Time Division Multiple Access (TDMA)

AirMax protocol allows each client to send

& receive data using pre-designated time

Dual Ethernet Connectivity *

The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.

Intelligent POE**

Remote hardware reset circuitry of

NanoStation M allows for device to be reset remotely from power supply location. In addition, any NanoStation can easily

slots scheduled by an intelligent AP controller.

This “time slot” method eliminates hidden node collisions & maximizes air time efficiency. It provides many magnitudes of performance improvements in latency, throughput, & scalability compared to all other outdoor systems in its class.

Intelligent QoS Priority is given to voice/video for seamless access. Scalability High capacity and scalability.

Long Distance Capable of high speed 50 km+ links

Latency Multiple features dramatically reduce noise.

* Only NanoStation M models.

** Remote reset is an additional option. Nanostation M comes standard as 24V without remote reset.

Models    03

[top] NSM2 (2.4GHz, 10.4-11.2dBi), NSM3 (3.4-3.7GHz, 12.2-13.7dBi), NSM365 (3.65GHz, 12.2-13.7dBi), NSM5 (5GHz, 14.6-16.1dBi)

[bottom left] LOCOM9 (900MHz, 8dBi) [bottom right] LOCOM2 (2.4GHz, 8.5dBi), LOCOM5 (5GHz, 13dBi)

Software      04

OS

AirOS is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables hi-performance outdoor multipoint networking.

Protocol Support

Ubiquiti Channelization

Spectral Width Adjust

ACK Auto-Timing

AAP Technology

Multi-Language Support

View

Integrated on all Ubiquiti M products,

AirView provides Advanced Spectrum Analyzer Functionality: Waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.

Waterfall Aggregate energy over time for each frequency.

Waveform Aggregate energy collected.

Real-time Energy is shown real-time as a function of frequency.

Recording Automize AirView to record and report results.

Contro l

AirControl is a powerful and intuitive web based server network management application which allows operators to centrally manage entire networks of Ubiqutii devices.

Network Map

Monitor Device Status

Mass Firmware Upgrade

Web UI Access

Manage Groups of Devices

Task Scheduling

Specifications    05

 

 

* Only 5745 – 5825 MHz is supported in the USA

** Applies to both NanoStation M and NanoStation Loco M models

Specifications (cont.) – LOCOM9 06

 

NanoStation Loco M9 – Operating Frequency 902-928 MHz
OUTPUT POWER: 28 dBm
900 MHz TX POWER SPECIFICATIONS 900 MHz RX POWER SPECIFICATION S
MCS0 28 dBm +/- 2 dB MCS0 -96 dBm + /- 2 dB
MCS1 28 dBm +/- 2 dB MCS1 -95 dBm + /- 2 dB
MCS2 28 dBm +/- 2 dB MCS2 -92 dBm + /- 2 dB
MCS3 28 dBm +/- 2 dB MCS3 -90 dBm + /- 2 dB
MCS4 28 dBm +/- 2 dB MCS4 -86 dBm + /- 2 dB
MCS5 24 dBm +/- 2 dB MCS5 -83 dBm + /- 2 dB
MCS6 22 dBm +/- 2 dB MCS6 -77 dBm + /- 2 dB
MCS7 21 dBm +/- 2 dB MCS7 -74 dBm + /- 2 dB
MCS8 28 dBm +/- 2 dB MCS8 -95 dBm + /- 2 dB
MCS9 28 dBm +/- 2 dB MCS9 -93 dBm + /- 2 dB
MCS10 28 dBm +/- 2 dB MCS10 -90 dBm + /- 2 dB
MCS11 28 dBm +/- 2 dB MCS11 -87 dBm + /- 2 dB
MCS12 28 dBm +/- 2 dB MCS12 -84 dBm + /- 2 dB
MCS13 24 dBm +/- 2 dB MCS13 -79 dBm + /- 2 dB
MCS14 22 dBm +/- 2 dB MCS14 -78 dBm + /- 2 dB
MCS15 21 dBm +/- 2 dB MCS15 -75 dBm + /- 2 dB

Specifications (cont.) – LOCOM2 07

NanoStation Loco M2 Operating Frequency 2412-2462 MHz

OUTPUT POWER: 23 dBm

2.4 GHz TX POWER SPECIFICATIONS

2.4 GHz RX POWER SPECIFICATION

S

DataRate

Avg. TX

Tolerance

DataRate

Avg. TX

Tolerance

1-24 Mbps

23 dBm

+/- 2 dB

1-24 Mbps

-83 dBm

+ /- 2 dB

36 Mbps

21 dBm

+/- 2 dB

36 Mbps

-80 dBm

+ /- 2 dB

48 Mbps

19 dBm

+/- 2 dB

48 Mbps

-77 dBm

+ /- 2 dB

54 Mbps

18 dBm

+/- 2 dB

54 Mbps

-75 dBm

+ /- 2 dB

MCS0

23 dBm

+/- 2 dB

MCS0

-96 dBm

+ /- 2 dB

MCS1

23 dBm

+/- 2 dB

MCS1

-95 dBm

+ /- 2 dB

MCS2

23 dBm

+/- 2 dB

MCS2

-92 dBm

+ /- 2 dB

MCS3

23 dBm

+/- 2 dB

MCS3

-90 dBm

+ /- 2 dB

MCS4

22 dBm

+/- 2 dB

MCS4

-86 dBm

+ /- 2 dB

MCS5

20 dBm

+/- 2 dB

MCS5

-83 dBm

+ /- 2 dB

MCS6

18 dBm

+/- 2 dB

MCS6

-77 dBm

+ /- 2 dB

MCS7

17 dBm

+/- 2 dB

MCS7

-74 dBm

+ /- 2 dB

MCS8

23 dBm

+/- 2 dB

MCS8

-95 dBm

+ /- 2 dB

MCS9

23 dBm

+/- 2 dB

MCS9

-93 dBm

+ /- 2 dB

MCS10

23 dBm

+/- 2 dB

MCS10

-90 dBm

+ /- 2 dB

MCS11

23 dBm

+/- 2 dB

MCS11

-87 dBm

+ /- 2 dB

MCS12

22 dBm

+/- 2 dB

MCS12

-84 dBm

+ /- 2 dB

MCS13

20 dBm

+/- 2 dB

MCS13

-79 dBm

+ /- 2 dB

MCS14

18 dBm

+/- 2 dB

MCS14

-78 dBm

+ /- 2 dB

MCS15

17 dBm

+/- 2 dB

MCS15

-75 dBm

+ /- 2 dB

Specifications (cont.) – LOCOM5 08

NanoStation Loco M5 Operating Frequency 5470-5825 MHz*

OUTPUT POWER: 23 dBm

5 GHz TX POWER SPECIFICATIONS

5 GHz RX POWER SPECIFICATIONS

DataRate

Avg. TX

Tolerance

DataRate

Avg. TX

Tolerance

6-24 Mbps

23 dBm

+/- 2 dB

6-24 Mbps

-83 dBm

+ /- 2 dB

36 Mbps

21 dBm

+/- 2 dB

36 Mbps

-80 dBm

+ /- 2 dB

48 Mbps

19 dBm

+/- 2 dB

48 Mbps

-77 dBm

+ /- 2 dB

54 Mbps

18 dBm

+/- 2 dB

54 Mbps

-75 dBm

+ /- 2 dB

MCS0

23 dBm

+/- 2 dB

MCS0

-96 dBm

+ /- 2 dB

MCS1

23 dBm

+/- 2 dB

MCS1

-95 dBm

+ /- 2 dB

MCS2

23 dBm

+/- 2 dB

MCS2

-92 dBm

+ /- 2 dB

MCS3

23 dBm

+/- 2 dB

MCS3

-90 dBm

+ /- 2 dB

MCS4

22 dBm

+/- 2 dB

MCS4

-86 dBm

+ /- 2 dB

MCS5

20 dBm

+/- 2 dB

MCS5

-83 dBm

+ /- 2 dB

MCS6

18 dBm

+/- 2 dB

MCS6

-77 dBm

+ /- 2 dB

MCS7

17 dBm

+/- 2 dB

MCS7

-74 dBm

+ /- 2 dB

MCS8

23 dBm

+/- 2 dB

MCS8

-95 dBm

+ /- 2 dB

MCS9

23 dBm

+/- 2 dB

MCS9

-93 dBm

+ /- 2 dB

MCS10

23 dBm

+/- 2 dB

MCS10

-90 dBm

+ /- 2 dB

MCS11

23 dBm

+/- 2 dB

MCS11

-87 dBm

+ /- 2 dB

MCS12

22 dBm

+/- 2 dB

MCS12

-84 dBm

+ /- 2 dB

MCS13

20 dBm

+/- 2 dB

MCS13

-79 dBm

+ /- 2 dB

MCS14

18 dBm

+/- 2 dB

MCS14

-78 dBm

+ /- 2 dB

MCS15

17 dBm

+/- 2 dB

MCS15

-75 dBm

+ /- 2 dB

* Only 5745 – 5825 MHz is supported in the USA

Specifications (cont.) – NSM2 09

NanoStation M2 Operating Frequency 2412-2462 MHz

OUTPUT POWER: 28 dBm

2.4 GHz TX POWER SPECIFICATIONS

2.4 GHz RX POWER SPECIFICATION

S

DataRate

Avg. TX

Tolerance

DataRate

Avg. TX

Tolerance

1-24 Mbps

28 dBm

+/- 2 dB

1-24 Mbps

-97 dBm min

+ /- 2 dB

36 Mbps

26 dBm

+/- 2 dB

36 Mbps

-80 dBm

+ /- 2 dB

48 Mbps

25 dBm

+/- 2 dB

48 Mbps

-77 dBm

+ /- 2 dB

54 Mbps

24 dBm

+/- 2 dB

54 Mbps

-75 dBm

+ /- 2 dB

MCS0

28 dBm

+/- 2 dB

MCS0

-96 dBm

+ /- 2 dB

MCS1

28 dBm

+/- 2 dB

MCS1

-95 dBm

+ /- 2 dB

MCS2

28 dBm

+/- 2 dB

MCS2

-92 dBm

+ /- 2 dB

MCS3

28 dBm

+/- 2 dB

MCS3

-90 dBm

+ /- 2 dB

MCS4

27 dBm

+/- 2 dB

MCS4

-86 dBm

+ /- 2 dB

MCS5

25 dBm

+/- 2 dB

MCS5

-83 dBm

+ /- 2 dB

MCS6

23 dBm

+/- 2 dB

MCS6

-77 dBm

+ /- 2 dB

MCS7

22 dBm

+/- 2 dB

MCS7

-74 dBm

+ /- 2 dB

MCS8

28 dBm

+/- 2 dB

MCS8

-95 dBm

+ /- 2 dB

MCS9

28 dBm

+/- 2 dB

MCS9

-93 dBm

+ /- 2 dB

MCS10

28 dBm

+/- 2 dB

MCS10

-90 dBm

+ /- 2 dB

MCS11

28 dBm

+/- 2 dB

MCS11

-87 dBm

+ /- 2 dB

MCS12

27 dBm

+/- 2 dB

MCS12

-84 dBm

+ /- 2 dB

MCS13

25 dBm

+/- 2 dB

MCS13

-79 dBm

+ /- 2 dB

MCS14

23 dBm

+/- 2 dB

MCS14

-78 dBm

+ /- 2 dB

MCS15

22 dBm

+/- 2 dB

MCS15

-75 dBm

+ /- 2 dB

Specifications (cont.) – NSM3/NSM365

NanoStation M3 (3400-3700 MHz) / NanoStation M365 (3650-3675 MHz )

OUTPUT POWER: 25 dBm

TX POWER SPECIFICATIONS

RX POWER SPECIFICATIONS

MCS0

25 dBm

+/- 2 dB

MCS0

-94 dBm

+ /- 2 dB

MCS1

25 dBm

+/- 2 dB

MCS1

-93 dBm

+ /- 2 dB

MCS2

25 dBm

+/- 2 dB

MCS2

-90 dBm

+ /- 2 dB

MCS3

25 dBm

+/- 2 dB

MCS3

-89 dBm

+ /- 2 dB

MCS4

24 dBm

+/- 2 dB

MCS4

-86 dBm

+ /- 2 dB

MCS5

23 dBm

+/- 2 dB

MCS5

-83 dBm

+ /- 2 dB

MCS6

22 dBm

+/- 2 dB

MCS6

-77 dBm

+ /- 2 dB

MCS7

20 dBm

+/- 2 dB

MCS7

-74 dBm

+ /- 2 dB

MCS8

25 dBm

+/- 2 dB

MCS8

-93 dBm

+ /- 2 dB

MCS9

25 dBm

+/- 2 dB

MCS9

-91 dBm

+ /- 2 dB

MCS10

25 dBm

+/- 2 dB

MCS10

-89 dBm

+ /- 2 dB

MCS11

25 dBm

+/- 2 dB

MCS11

-87 dBm

+ /- 2 dB

MCS12

24 dBm

+/- 2 dB

MCS12

-84 dBm

+ /- 2 dB

MCS13

23 dBm

+/- 2 dB

MCS13

-79 dBm

+ /- 2 dB

MCS14

22 dBm

+/- 2 dB

MCS14

-78 dBm

+ /- 2 dB

MCS15

20 dBm

+/- 2 dB

MCS15

-75 dBm

+ /- 2 dB

Specifications (cont.) – NSM5

NanoStation M5 Operating Frequency 5470-5825 MHz

OUTPUT POWER: 27 dBm

5 GHz TX POWER SPECIFICATIONS

5 GHz RX POWER SPECIFICATIONS

DataRate

Avg. TX

Tolerance

DataRate

Avg. TX

Tolerance

6-24 Mbps

27 dBm

+/- 2 dB

6-24 Mbps

-94 dBm min

+ /- 2 dB

36 Mbps

25 dBm

+/- 2 dB

36 Mbps

-80 dBm

+ /- 2 dB

48 Mbps

23 dBm

+/- 2 dB

48 Mbps

-77 dBm

+ /- 2 dB

54 Mbps

22 dBm

+/- 2 dB

54 Mbps

-75 dBm

+ /- 2 dB

MCS0

27 dBm

+/- 2 dB

MCS0

-96 dBm

+ /- 2 dB

MCS1

27 dBm

+/- 2 dB

MCS1

-95 dBm

+ /- 2 dB

MCS2

27 dBm

+/- 2 dB

MCS2

-92 dBm

+ /- 2 dB

MCS3

27 dBm

+/- 2 dB

MCS3

-90 dBm

+ /- 2 dB

MCS4

26 dBm

+/- 2 dB

MCS4

-86 dBm

+ /- 2 dB

MCS5

24 dBm

+/- 2 dB

MCS5

-83 dBm

+ /- 2 dB

MCS6

22 dBm

+/- 2 dB

MCS6

-77 dBm

+ /- 2 dB

MCS7

21 dBm

+/- 2 dB

MCS7

-74 dBm

+ /- 2 dB

MCS8

27 dBm

+/- 2 dB

MCS8

-95 dBm

+ /- 2 dB

MCS9

27 dBm

+/- 2 dB

MCS9

-93 dBm

+ /- 2 dB

MCS10

27 dBm

+/- 2 dB

MCS10

-90 dBm

+ /- 2 dB

MCS11

27 dBm

+/- 2 dB

MCS11

-87 dBm

+ /- 2 dB

MCS12

26 dBm

+/- 2 dB

MCS12

-84 dBm

+ /- 2 dB

MCS13

24 dBm

+/- 2 dB

MCS13

-79 dBm

+ /- 2 dB

MCS14

22 dBm

+/- 2 dB

MCS14

-78 dBm

+ /- 2 dB

MCS15

21 dBm

+/- 2 dB

MCS15

-75 dBm

+ /- 2 dB

* Only 5745 – 5825 MHz is supported in the USA

Misc

Protect your networks from the most brutal environments with Ubiquiti’s industrialgrade shielded ethernet cable, TOUGHCable.

Increase Performance Dramatically improve your ethernet link states, speeds, and overall performance with Ubiquiti TOUGHCables.

Extreme Weatherproof TOUGHCables have been built to perform even in the harshest weather and environments.

Eliminate ESD Attacks Protect your networks from devastating ESD Attacks, TOUGHCables eliminate ESD attacks and ethernet hardware damage.

Extended Cable Support TOUGHCables have been developed to have increased power handling performance for extended cable run lengths.

Bulletproof your networks

TOUGHCable is currently available in two versions: Level 1 Shielding Protection and Level 2 Shielding Protection.

Level 1 is a Category 5e (Up to 1Gbps Ethernet Support) Outdoor Carrier Class Shielded Cable.

Level 2 is a Category 5e Enhanced Gigabit Performance (1Gbps Ethernet Support) Outdoor Carrier Class Shielded Cable.

Additional Information:

  • 24 AWG copper conductor pairs
  • ESD Drain Wire: 26 AWG integrated ESD Drain wire to prevent ESD attacks & damage. • PVC outdoor rated jacket
  • 0.35um foil shield
  • Multi-Layered Shielding
  • 1000ft (304.8m) length • Use with TOUGHCable Connectors (sold separately) for optimal performance

Learn more: http://www.ubnt.com/toughcable ESD Attacks are overwhelmingly the leading cause for device failures. The diagram below illustrates the areas vulnerable to ESD Attacks in a defenseless network.

By using a grounded Ubiquiti POE adapter

(included) along with Ubiquiti TOUGHCable (sold separately), you can effectively eliminate ESD Attacks.

TERMS OF USE: The Ubiquiti radio device must be professionally installed. Shielded ethernet cable and earth grounding must be used as conditions of product warranty. It is the installers responsibility to follow local country regulations including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

For further information, please visit http://www.ubnt.com.

All specifications in this document are subject to change without notice. NSM-DS-042911

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s